Pennsylvania Interconnection

If you are interested in interconnecting small generation with the Company's distribution system you must first determine the size and type of equipment which best suits your requirements in accordance with the Company's Tariff.  The Interconnection Tariff rate schedule is available on the Company's Pennsylvania tariffs page.
 

See the Pennsylvania Public Utility Commission’s website for Regulations for Interconnection Standards at 52 Pa. Code §75.21 et seq., http://www.puc.state.pa.us/PcDocs/630340.doc.

Below are guidelines for determining which application is required.  The online and paper applications are available in Step 5.  If you use the online application, the level will be determined for you based on the data that you provide.

• Level 1 - Generator Capacity of ≤ 10 kW, Inverter based, certified
• Level 2 & 3 - Generator Capacity of up to 2,000 kW, Inverter based, certified
• Level 4 - see http://www.puc.state.pa.us/pcdocs/1034191.doc for information

Net Metering

See the Pennsylvania Public Utility Commission's website for Regulations for Net Metering at 52 Pa. Code §75.11 et seq., http://www.puc.state.pa.us/PcDocs/568424.doc

• Level 1 - $100.00
• Level 2 - $250.00 + $1.00 per kW
• Level 3 - $350.00 + $2.00 per kW
• Level 4 - Click here for fees 
  

You are required to submit a site plan and one-line diagram with your application.  The online application allows you to attach these documents during the fourth step of the application process.

Submit Site Plan

• Site Plan Example
  

Please do not send overhead internet photos. The site plan must include:

• Overall property layout and street access including North arrow orientation and the nearest cross street in each direction. (Indicate direction of nearest cross street if impractical to show on drawing).
• Ground mounted installations must show clearances and details of surrounding structures especially how they cross the Company's facilities.  The route and length of the electrical connection to the premise is also required.
• Location of the DER AC disconnect meeting the requirements of the NEC - for self-contained metering locations.
• Location of the DER utility required AC visible break disconnect - for metering locations utilizing instrument transformers.
• Location of generation, inverter, storage and associated electrical equipment. 
• Location of service transformer.

Submit One-Line Diagram

• PV Example
• Turbine Example

The one-line diagram must include:

• Energy source (PV array, wind turbine, etc.). Please indicate DC and AC ratings as appropriate.
• Please indicate AC rating of the inverter.
• Identify the make and model of the disconnect switch and note if it is lockable with a visible break when required.
• Identify connection to Customer’s electrical system.
• Identify utility meter, inverter and/or associated generation and storage (battery) equipment.

Complete Your Application

NEW Online Portal Now Available

We are excited to announce the launch of our new online interconnection Portal! The online portal will make the application process more convenient and efficient for you. We strongly encourage you to explore the benefits of using the new portal and are interested in your feedback. 

Interconnection Portal

Paper Applications

• Level 1 Application - < to 10 kW, Inverter based, UL 1741 Certified
• Levels 2, 3 and 4 Application
• Net Energy Metering Rider Application
  See the Pennsylvania Public Utility Commission's website for Regulations for Net Metering at 52 Pa. Code §75.11 et seq., http://www.puc.state.pa.us/PcDocs/568424*

Following approval of the application, the Customer installs the facility in accordance with the Application, PUC rules and the Company's Requirements for Interconnection of Customer-Owned Generation to the FirstEnergy Distribution System.

Following installation, the customer submits final completed documents:

1. Level 1 Application/Agreement OR Level 2,3 or 4 Agreement
   
2. Certificate of Completion
3. Submit evidence of electrical inspection by an authorized inspection agency:
   The customer is responsible for contacting their local, city, or county code office for additional permit information and contracting the electrical inspector to schedule an inspection. Upon completion of a satisfactory inspection, the electrical inspector may forward the Certificate of Electrical Approval via the same method as Step 1 above or may sign the Certificate of Completion where designated.

For a list of electrical inspectors, please contact your municipal or county authority.

Engineering will:

• Review the as-built installation and final documentation for compliance.
• Determine the need for a witness test as provided for in the regulations and notify customer.
• Finalize documentation and authorize system operation.
• Notify customer of the status of customer's application.
• Arrange for the installation of net energy metering, where appropriate.

Note: Generation interconnection should not be energized prior to electrical inspection and receipt of Certificate of Completion signed by authorized Company personnel

If you receive Approval to Operate, the Company will automatically replace the existing meter with a meter capable of bi-directional registration.  Depending on meter availability and other work priorities, this may take several weeks.

Although you do not have to wait until the bi-directional meter is installed to operate your facility, FirstEnergy will not be responsible for tracking and crediting your excess generation until it is installed.  

You should be aware that depending on the type of meter currently set at your service location:

• Your existing meter could offset your usage by your excess generation, thereby "netting" your energy flows internally, rather than separately registering the energy in and out of your facility.  
• Your existing meter may include a feature that prevents it from turning backwards and registering reverse power flow.  In this case, even though your facility should reduce the amount of electricity you need to purchase, the electricity your facility generates in excess of your current consumption would not be measured or subtracted from your overall electrical energy use.  
• Your existing meter may register the kilowatt-hours your facility is providing to FirstEnergy's  system as though they were being delivered to you from FirstEnergy's system.  You should not operate your facility in this circumstance since it will result in charges for the energy that you generate.  Please check with your installer to ensure that you do not have this type of meter before operating your facility.